Hitron CODA-4582 Wall Mount
Description
This Is A Wall Mount For The Hitron Coda-4582 (Rogers Gigabit) Modem. The Holes Are 3.8Mm So An M3 Screw Or #6 Screw Will Work. Drywall Screws Fit As Well. I Used 3M Command Strips (3Lb Spec) As Well To Extra Holding Strength. Edit: 5/02/20 Re-Designed Both Elements As I Learn F360. Optimized For Material Use; Cutting Down Filament (By Almost 1/2) And Print Time. I Do Recommend Using The Halo. Base: New: 72G | 4Hr 02M (25% Infill And 0.35 Layer) Old: 143G | 5Hr 55M Halo: New: 31G | 1Hr 44M (15% Infill And 0.35 Layer) Old: 40G | 1Hr 53M
Statistics
Likes
16
Downloads
0