Parametric Stepper Motor Crank for 1/4" or 6.25mm shaft
Description
I Wanted A Stepper Motor Crank For Manually Moving The Steppers (When Unpowered) But My Motors Have A 1/4" Shaft So I Designed My Own Crank. The Shaft Diameter Is Parametric (Along With The Other Values) So It Should Be Adaptable To Other Sizes. The Size Is Perfect For Use With A Nema 23 Motor But Can Be Changed. I Used An M3-0.5 16Mm Pan Head Machine Screw And Nut To Secure The Crank On The Shaft And An Additional M3-0.5 16Mm Pan Head Machine Screw With Washers Threaded Into The Handle. You Might Need To Tap The Handle But I Was Able To Directly Thread The M3 Screw Into The Handle.
Statistics
Likes
8
Downloads
0