Parametric Parts for CNC Router and 80/20 Extrusions

Description

I'Ve Got A Lot Of Miscellaneous Parts I Designed For My Cnc Router Build (Https://Openbuilds.Com/Builds/Fixed-Gantry-Cnc-Router-With-Old-Industrial-Supplies.6742/). I Used 8Mm Leadscrews, 16Mm Linear Rails, A 16Mm Ballscrew, 80/20 Series 1530 (1.5" X 3") Extrusion, Etc But All The Files Are Parametric So They Should Be Easily Adaptable To Other Sizes. I'Ve Included Here: Router_Mount.Stl A Mount For Holding A 64Mm Diameter Cylindrical Object (Such As A Harbor Freight Trim Router) And Mounting It To Something With 4 Sae #10 1.5" Machine Screws (Such As The Z_Mounting_Plate Below). X_Nut_Connector_V3.Stl Used With 2 Sae #10 Machine Screws And T-Nuts To Attach Aluminum Extrusion To A Standard 8Mm Leadscrew Nut. X_Pillow_Block_Spacer_V4.Stl A Small Spacer For Something With 42Mm Mounting Holes (Such As An 8Mm Pillowblock). Y_Guide_Drill_Template.Stl Y_Guide_Drill_Template_Half.Stl Y_Guide_Drill_Template_Half_Trimmed.Stl A Drilling Template For Use With 4 Linear Rail Guides With 4 Mounting Holes Each. It Was Too Large For My Print Bed So I Trimmed It And Cut It In Half. And Then I Changed The Layout Slightly And Decided To Just 2D Print The New Version On Paper. Y_Nut_Mount.Stl A Mount For A 16Mm Ballnut (1605). Z_Mounting_Plate_2_Guides_V2.Stl Z_Mounting_Plate_V4.Stl Mounting Plate For Connecting A Router Mount (Such As Found Above) To Either 1 Guide Per Side Or 2 Guides Per Side When The Guides Are Sitting On Linear Rails Mounted To The Outside Of 80/20 Series 1530 Aluminum Extrusion (See Pictures). This Might Work In Some Situations But I Found There To Be Too Much Side-To-Side Play So I Used A Different Z Mounting Plate After Moving The Rails From The Side To The Front Of The Aluminum Extrusion. Z_Nut_Mount_V2.Stl Used With 2 Sae #10 Machine Screws To Attach A Standard 8Mm Leadscrew Nut To The Z_Mounting_Plate Above. Should Be A Drop In Part For The Openbuild Anti-Backlash Nut For 8Mm Leadscrews (Http://Openbuildspartstore.Com/Anti-Backlash-Nut-Block-For-8Mm-Metric-Acme-Lead-Screw/). The Anti-Backlash Nut Didn'T Initially Seem To Fit My 8Mm Leadscrew Purchased Elsewhere But After A Few Dozen Insertions/Removals, The Leadscrew Reamed Out Enough Plastic To Work. Z_Stepper_Motor_Mount_Revised.Stl Adapter To Mount A Nema 23 Stepper To The End Of An 80/20 Series 1530 Aluminum Extrusion. The Adapter Is Secured To The End Of The Extrusion After Tapping The Holes And The Stepper Is Secured To The Adapter. See Photo.

Statistics

Category

Tags