Nespresso Capsule holder freely rotating
Description
This Is A Remix From Dionlevi'S Capsule Holder. Https://Www.Thingiverse.Com/Thing:745377 It Was Already Really Nice, But I Thought It Was A Shame That The Rotation Is Just Using Plastic Over Plastic Friction. So, I Decided To Give My First Try At Blender To Modify It So You Can Fit A 608Rs Bearing Between Both Parts. F608Zz Will Work Too, And You Won'T Have To Worry About Pushing The Bearing Too Far In The Hole. Included Are Both Short (172Mm Height) And Tall (200Mm Height) Holders. Step 1, Print Both Parts (0.2Mm, 20% Fill Density, 1.2Mm Shell, Top And Bottom Were Used On My Cr10, Printed In Petg) Step 2, Fit The Bearing Inside The Hole In The Holder. No Glue Needed, If You Need A Bit Of Sanding, Keep It Minimal In This Area Or You Will Need Some Glue. Step 3, Put The Holder On Its Base And Fill It. Step 4, Enjoy Your Newly Made Capsule Holder, What Else? I Also Included Some Test Files So You Can Check How Well Your Bearing Will Fit Without Printing The Whole Parts. Small Video Of It Spinning: Https://Youtu.Be/Dkvsu7Q8J-U
Statistics
Likes
32
Downloads
0