Firesteel Handle "Fire-Logo"
Description
I Bought Some Blank Firesteel Rods And Now I Created A Nice And Simpe Handle For It. Print Was Really Easy, With A Raft And A Little Support. See Pictures For Details. I Used The Rods: 75Mm X 6,45Mm The Rod Goes 25Mm Inside Of The Handle, So It Should Be No Problem To Carve The Hole Bigger If You Like. <H2>Print Settigns</H2> Infill: 100% (Outdoor Use!!) Layer: 0,2Mm Raft: Yes Support: Yes Print-Time: Approx. 1,5 Hours I Used This Filament: Https://Www.Amazon.De/Filament-Drucker-Printer-Zertifiziert-Qualit%C3%A4T/Dp/B01Llju972/Ref=As_Li_Ss_Tl?Ie=Utf8&Qid=1519235640&Sr=8-9&Keywords=Esun+Petg&Linkcode=Sl1&Tag=Vapefreak-21&Linkid=C501Dabcbaa070419E6C83E23D0Cb49F Here Are Some Links To Rods You Can Buy On Amazon: Https://Www.Amazon.De/Filament-Drucker-Printer-Zertifiziert-Qualit%C3%A4T/Dp/B01Llju972/Ref=As_Li_Ss_Tl?Ie=Utf8&Qid=1519235640&Sr=8-9&Keywords=Esun+Petg&Linkcode=Sl1&Tag=Vapefreak-21&Linkid=C501Dabcbaa070419E6C83E23D0Cb49F I Used The Following Tape On My Cr-10: Https://Www.Amazon.De/Filament-Drucker-Printer-Zertifiziert-Qualit%C3%A4T/Dp/B01Llju972/Ref=As_Li_Ss_Tl?Ie=Utf8&Qid=1519235640&Sr=8-9&Keywords=Esun+Petg&Linkcode=Sl1&Tag=Vapefreak-21&Linkid=C501Dabcbaa070419E6C83E23D0Cb49F This Stuff Is Really Great, No Extra Glue Needed, 100% Sticky To The Printed Parts, Which Come Off Really Easily, Even Without Destroying The Tape. <H3>Extra Tip</H3> Another Very Hot Tip Is To Use Kapton Tape! Here You Get The Glossy Finish And Perfect Adhesion Like With The Blue Tape! Look At This: 200Mm Kapton Tape: Https://Www.Amazon.De/Filament-Drucker-Printer-Zertifiziert-Qualit%C3%A4T/Dp/B01Llju972/Ref=As_Li_Ss_Tl?Ie=Utf8&Qid=1519235640&Sr=8-9&Keywords=Esun+Petg&Linkcode=Sl1&Tag=Vapefreak-21&Linkid=C501Dabcbaa070419E6C83E23D0Cb49F Have Fun! (Amazon Affiliate Links)
Statistics
Likes
3
Downloads
0