Re-X Carriage Radial Right Fan with D Cooler
Description
A Custom Radial Fan Mounted On The Right Side Of The Re-X Carriage. It Includes A D Cooler That Provides 360 Degree Cooling Around The Nozzle. It Will Require That Your E3D Heater Block To Be Orientated Correctly, With The Heater Cartridge Towards The Rear. Update: You May Need To Scale This Up 1% To Account For Shrinkage Of Abs. The Mount To The Motor Was A Little Tight On Mine, Which Caused The Tab To Break Off. Will Look Into It In The Coming Days. I Have Updated It To My Final Design. I Had To Add A Notch On The Fan To Incorporate Some Clips My Fan Had To Hold The Casing Together. This Version Fits Very Tight. I Also Changed The Holes For The Air Around The Nozzle From A Bunch Of Little 3Mm Holes To An Entire Open Area. Due To This Change You Will Have To Print With Supports. However, It Actually Comes Out Much Cleaner Looking For Me On My Prints.
Statistics
Likes
8
Downloads
0