Tekno EB410 Droop Gauge
Description
I Needed A Simple Gauge To Set The Suspension Droop On My Tekno Eb410 4Wd Buggy, As I Hate Doing It Using Calipers. The Measurement Range Is 60 Mm To 100 Mm, With 100 Mm At The Very End Of The Gauge. The Measurement Scale Lines Can Be Painted To Make Them Stand Out. To Set The Suspension Droop, First Remove The Shock Nut And Top Of The Shock From The Upper Mounting Screw (The Entire Shock May Need To Be Removed In The Rear). Place The Hole At The End Of The Droop Gauge On The Mounting Screw With The Scale Facing Out. Use The Droop Screw In The Suspension Arm And Align The Scale At The End Of The Gauge With The Center Mark On The Lower Shock Mounting Pin To Set The Droop. The Stock Droop Settings Are 78 Mm In The Front And 88 Mm In The Rear.
Statistics
Likes
10
Downloads
0