Painting Handle
Description
This Is A Painting Handle Capable Of Holding Miniatures With Bases Of 25Mm As Well As 32Mm In Diameter But Not Limited To This. The Handle Makes It Much Easier To Hold A Miniature During Painting. It Has 2 Different Slots For Bases Of Different Diameter. There Is Also A Slot On The Bottom Where You Could Glue In A 10X1 Magnet In Order To Stick It To Some Metallic Surface (Can Lids?). ***Update 10 May 2018:*** Version 3.3.3 Uploaded. Many Improvements Are Made To The Design. Among Them Are: - Caps Design Is Changed And Is Now Less Prone To Breaks - Center Point Of The Slot For 25Mm Bases Is Shifted So Now Bases Are Held Much Better - Pins Are Added To The Sides Of The Handle So It Is Easier To Open - All Parts Are Oriented Correctly So No Need To Rotate Them Before Printing Old Version Of The Handle Is Available Here: Https://Www.Dropbox.Com/S/Ifzvas87Bq0Xauw/Painting_Handle_V3.1.Zip?Dl=0 ***Update 10 March 2018:*** - Added 0.2Mm Chamfer To The Handle To Prevent Formation Of 'Elephant Foot' ***Update 5 March 2018:*** - Gap Between Handle And Platform Increased From 0.2 To 0.3 Mm - Chamfers Added To The Cap
Statistics
Likes
3032
Downloads
0