PS4 thumbstick extenders - library of options
Description
I Designed A Ps4 Joystick Extender That Would Print With The Detail I Wanted. I Had Printed Some Other Extenders I Found On Thingiverse, But They Wouldn'T Print With The Detail I Wanted. Either There Was Too Much Overhang Or I'D Print With Supports But The Final Product Didn'T Look Great. The Ones I Created Print In 2 Pieces And Then I Super Glued The Halves Together. So Yes, There'S Some Post-Processing, But Doing So Allows You To Get Good Detail On The Top Of The Stick (Where Your Thumb Goes) And Good Detail On The Snapping Features. I Created A Whole Library Of Options Depending On What You May Find Comfortable - Different Heights And With Or Without Ridges On Top (For Extra Grip), Etc. Choose A Bottom (Suffix "_Bot") Based On The Height You Want And A Top (Suffix "_Top") Based On The Style Of Top You Want. Here'S The Decoder For The File Names: The "2D" Or "3D" Is The Depth (2 = 2 Mm, 3 = 3Mm) Of The Dent On Top. The Ones That Have A 2 Mm Depth Have An Option For A Convex Bump Or Not (See Below). The Ones That Have A 3 Mm Deep Dent Only Have The Convex Bump On Top. The Number Before The H Is The Height In Mm. So "10H" Is A 10 Mm Height Extension. The "B" Or "No-B" Is Whether Of Not There'S A Bump On Top. Meaning, If It'S "No-B," Then The Top Is Concave. If It'S "B" Then It'S Convex On Top. Lastly, The "R" And "No-R" Is Whether Or Not There Are Ridges On Top. Personally, I Don'T Use Them On The Ones I Used, But I Tried It Out To See If I Liked The Extra Grip From Them. The One Shown In The Images Is A "3D_B_No-R" And A 10 Mm Height Extension.
Statistics
Likes
52
Downloads
0