Anet A6 X Axis Half-slit Carriages
Description
Improvements Of Original Design ------------------------------------------- 1. The Carriages Are Adapted For 16 And 20-Tooth Pulleys. 1. Through Half-Slit Rod Mounting Holes (Fix By Screw-Nut Pairs, Variable Length And Uneven Ends Of Rod Allowed). 1. The Mount Of The X-Motor Is Reinforced From Above With A Stiffener. 1. Cooling Grooves In The Motor Mount. 1. Holes Field For Mounting The X-Endstop On The Left Carriage. 1. Ledges On The Left Carriage For The Standard X And Z Endstops. 1. Bevel Hole Of X-Tensioner Screw (For Installation In Assembly). 1. Optional Mount For The Counterbalance On The Right Carriage. 1. X-Tensioner Assemblies With M4X50 Countersunk Screw And Nut Instead M4X50 Hexagonal Head Screw (Rara Avis) Options ----------- There Is Two Options Of Carriages Design: With [Anti-Wobbling System](Https://Www.Thingiverse.Com/Thing:2604559) And Direct Nut Mounting. ### Using Of [Anti-Wobbling System](Https://Www.Thingiverse.Com/Thing:2604559) You Should Print The Parts **With "Aw" Index**, **Belt Tensioner** And **Counterbalance Mount** (Optional). ### Direct Nut Mounting You Should Print The All Parts **Without "Aw" Index**, Include Belt Tensioner And Counterbalance Mount (Optional). Z-Endstop Justification ------------------------------ Use This [Simple Part](Https://Www.Thingiverse.Com/Thing:2387186) To Adjust Vertical Position Of Z-Endstop.
Statistics
Likes
40
Downloads
0