Y axis H frame reinforcement
Description
I Had Got A Alunar M505, Which Is A Anet A8 Clone, The H Frame Was Bent Along One Side Of The Guide Rail, And Would Bind Up The Bearings, I Called For A Replacement But I Didn'T Want To Wait For A Month As It Was The Only Thing I Needed To Complete It, So I Had An 1 1/2"Aluminum Angle 1/8" Thick From Other Projects Sitting Around And After Measuring It Up With The Current H Plate Marked The Holes Onto It Drilled And Cut Side And Notches On The Ends For The Butterfly Nuts, And After I Assembled It, It Worked Out Great! Very Stable, Would Work For The Plastic Sheet Plate On Other Models Also. I Have The Main File In Case Your Measurements Are Different Then What I Was Getting Off My Plate, The Thing Needs To Be Straight Or You Will Get A Lot Of Noise From Your Bearings. So Use This As A Guide When Making Yours Or Use Something Stronger Then Pla, For I Am Still Upgrading Mine So I Can Work With Nylon And Abs. I Hope This Helps Or Gives You An Idea Or 2.
Statistics
Likes
6
Downloads
0