Tactile Button Case
Description
It Consist Of 3 Parts: - Base - Case - Button Additional Items Needed (Or Similar Alternatives): - Soldering Iron And Some Solder Wire - Electronics Glue [Link Here On Amazon](Https://Www.Amazon.De/Pattex-1472319-Spezialkleber-Kunststoff-30G/Dp/B004S1We4M/Ref=Sr_1_1?S=Diy&Ie=Utf8&Qid=1519562521&Sr=1-1&Keywords=Pattex+Plastic+Glue) - (Optional) Hot Glue Through A Hot Glue Gun - 0.14Mm2 Red And Black Wire To Connect The Button. *This Is For Mounting 6X6X3Mm Tactile Button Switches.* When I Assemble This I Mount The Switch Into The Case And Bend 2 Of The Legs Inwards. I Solder 2 Wires To The Button Ends, Push The Wires Through The Base And Add A Drop Of Glue To The Base Edges And Fit The Case In. Afterwards I Put A Drop Of Glue On The Button'S Top And Put The 3D Printed Button In The Case. Optionally Some Hot Glue Can Be Added In The Inside At The Wires For A Bit More Strength But I Think Its Not Really Needed.
Statistics
Likes
31
Downloads
0