FDM Friendly "Steins;gate" Upa
Description
I Found Myself Using Spope'S Upa As A Benchmark Print, But It Required A Lot Of Modification To Actually Get It To Print In One Part. Even As Multiple Parts, It'S Still Not Designed To Be Printed By An Fdm Printer. I Decided To Start From Scratch And Make My Own Model, And This Is What I Came Up With. It'S Not Perfect, And I Learned A Lot In The Process About Modeling Features Onto A Sphere. There Re A Few Goals I Was Going For When Designing The Model: - Make No Ugly Unprintable Curves (Meaning Have The Bottom Of Spheres Not Have An Unprintable Overhang Without Support). The Underside Of The Ears Have A 30 Degree Overhang (Which Wasn'T A Problem For Me Even With The Not-So-Great Part Cooling Fan On The Printrbot Play) And The Underside Of The Body Has A 45 Degree Overhang, So That Should Print Perfectly For Anyone. - Don'T Have A Bunch Of Intersecting Shells That Make It Impossible To Print In One Piece. This Is A Freebie With Fusion. - Do Some Stress-Testing. - Make It As Close To The Original With My Current Skills. There Are 3 Models Included. One Is Normal, One Has The 45 Degree Bottom, And One Has The 45 Degree Bottom And Tail Support.
Statistics
Likes
94
Downloads
0