Paint Holder / Brush Holder / Tool Holder
Description
This Holder Is Made For My Acrylic Paint Collection. The Paint Holes Have A Diameter Of 22Mm. The Paint I Use Is Called Amsterdam Set 24 Colors 20 Ml Tubes. Update-1, 9-3-2018 The Design Is Done (So Far) I Sorted Them Into Three Categories A, B & C. You Decide Witch One Is Best. 15% Infill Is Enough. D, Is For The Tool/Brush Holders. You Can Just Glue Them On The Back Of The Paint Holder Or Keep Them Separate. 30% Infill On These Works Best. Update-2, 10-3-2018 I Made A New Extension Version With Dowels (E), So You Can Make It As You Like. E, Has Hole'S For Dowels So You Can Extend It. I Recommend A 100% Infill For The Dowels. You May Have To Sand The Dowels A Little Bit For A Perfect Fit. I Also Recommend Using A Raft For The Dowel. And The Acryl Brush Holder E V1, Is 95 (Mm) Tall. Tool Holder E V1, 30% Infill On These Two Works Best. Update-3, 11-3-2018 I Just Added Side Brush/Tool Holders And A Separate Dowel For The Sides. Also On The Brush/Tool Holders Is A 30% Infill Enough. The Side Dowels Should Only Be Used In Combination With The Side Holders. Not With The Paint Holder.
Statistics
Likes
36
Downloads
0