Henry Vacuum Cleaner Hose Adapter
Description
This Is An Adapter To Allow My Old Vacuum Cleaner Hose To Fit Onto A Henry. The Aim For This Project Was To Be Able To Use My Existing Hose Without Modifying It. I Achieved This By Creating A Flange To Push Onto The Hose And A Screw Cap To Seal Onto To Vacuum. The Diameter Of The Screw Cap Is 62Mm, Making It An M62X4 Thread, With A 35Mm Hole Through The Center To Allow Free Rotation. The Flange Has A 33.5Mm Port For The Hose (My Hose Is 33Mm In Diameter). This Allows The Hose To Push Fit In My Case, But Other Prints May Need A Spot Of Glue. To Assemble, First Put The Cap On The Hose, Then Push The Flange On - As Shown In The Photos. I'Ve Got A Breakdown Of My Design Process On My Blog Here: Https://Plabs107524285.Wordpress.Com/2018/02/25/Designing-A-Hose-Adapter-For-Henry/
Statistics
Likes
4
Downloads
0