Smeg Fridge Spacer
Description
Had To Fix The Spacers On The Back Of A Smeg Fridge (Between The Wall And The Fridge, The Same Screws That Keep The Top Of The Fridge In Place), This Print Should Be Printed Laying Down Horizontally (Not Up Like It'S Aligned Originally) To Create A Strong Part. Not Sure If This Will Be Of Help To Someone, But It Should Also Work As A General Spacer For Fridges That Use Those Spacers. The Spacers Printed Actually Worked A Lot Better Than The Original Spacers. It'S Hard To Break. The 3.5Mm Depth For The Screws Should Let You Screw The Part In Without The Fear Of Breaking The Part, Just Be Sure Not To Over-Tighten The Screw And Ruin The Threads, Be Especially Aware Of This When Tightening On Plastic Threads. Standard M4 Screws Should Fit Nicely, The Hole Is Ø5Mm Diameter, M5 Will Drill Into The Plastic But Shouldn'T Break The Part.
Statistics
Likes
0
Downloads
0