CR-10 Filament sensor 2020 mount
Description
A Mount For The Cr-10S Filament Sensor Intended To Be Used With Quadbert'S 2020 Rollers. Https://Www.Thingiverse.Com/Thing:1409186 The Sensor Box Is The Same One I'Ve Printed And Successfully Used On One Of My Integrated Relocation Mounts, The 2020 Mount Is Untested, But Intended To Be Used With The Same Blocks From The Above Mentioned Roller So That It'S Free Sliding, Or Tnuts Could Be Used For A Fixed Mount. Print One Mount, One Lid, Heat Set Two 3Mm Nuts Into The Recesses With A Soldering Iron And Drop In The Sensor Switch Down, Then Install Lid And Two 3Mm Flat Head Screws. I Sized The 2020 Mount 20.2Mm Wide, 20.1Mm Tall With Two 3.5Mm Screw Holes. Normal Version Is 80Mm Overall Length, Long Version Is 100Mm. "Round" Versions Have Had 2Mm Fillets Added To Most Edges.
Statistics
Likes
11
Downloads
0