directional YAGI WLAN Antenna EXTENSION for 2.4 GHz - 2 pcs and letterless
Description
A Remix Of A [Remix](Https://Www.Thingiverse.Com/Thing:744962) Inspired By Another [Remix](Https://Www.Thingiverse.Com/Thing:20609). ***All I Did Here Was Remove The Letters From The Split Version Which Makes It Easier To Print***. All The Details Are Available On [Photonix'S](Https://Www.Thingiverse.Com/Photonix) [Original Part](Https://Www.Thingiverse.Com/Thing:19548/) - Copying From The [Instructions](Https://Www.Thingiverse.Com/Thing:19548#Instructions): > Use 0.75 Mm² (1 Mm Diameter) Copper Rods For 2.4-Ghz-Antenna-Extension: > > Position - Length: > A - 60 Mm > B - 53 Mm > C - 52 Mm > D - 51.5 Mm > E - 51 Mm > F - 50 Mm > > If You Want To Use 1.5 Mm² (1.4 Mmm Diameter) Copper Rods, Shorten The Length Of The Rods Around 1 Mm. > > To Use 2.5 Mm² (2 Mmm Diameter) Copper Rods, Drill Bigger Holes And Shorten The Length Of The Rods Around 2 Mm. > > Just Center The Rods In The Holes And Fixate Them With Glue. > > Place The Complete Antenna-Extension On Your Accesspoint-Antenna And You Have A Directional Wifi Signal :) > > The Gain Should Be Around 10 (+/- 2) Dbi. > > Have Fun :)
Statistics
Likes
20
Downloads
0