Hephestos 2 - E3D/BLtouch/BQSensor Mount (Bowden)

Description

This Is My E3D/Bltouch Mount For The Bq Hephestos 2 Printer. <Br><Br> Its Printable Without Any Support. There Are A Few Badass Overhangs. But Don'T Worry If Your Printer Is Well Enough Calibrated It'S Not An Issue At All.<Br><Br> The Only File That Needs Some Support Is The _"E3Dblt\_Heph2\_Rightgraft\_V1.Stl"_ There Are 2 Holes Covered By A 0.2Mm Layer, In The _"E3Dblt\_Heph2\_Carriage\_V12.Stl"_ To Help To Print It Without Support. So It'S Not An Issue In The Stl.<Br><Br><Br><Br> * **Installation: There Is A Pretty Detailed Installation Guide With Pictures. (Please Follow It) The Fans Can Be Mounted From The Beginning Or At The End Doesn'T Matter.** * **Do Not Use Pla Since It Will Melt Down At Some Spots. I Recommend Abs But Petg Should Do It As Well.** * **I Am Using Version 10 Of The Mount As This Release Contains V12. With Small Improvements. I Hope There Is No Issue Since I Never Printed This Version. It Should Be Okay. Just In Case! Xd** * **I Only Printed Abs With This Mount I Never Used The Part Cooling Fan. So I Don'T Know If The Fanduct Position Is Properly Given.**<Br><Br><Br><Br> >##### _Update1 / 28.2.18 :_ Added A Version For The Bq-Inductive Sensor. Using The Same Height As In The Original Mount (Not Tested Looking For A Betatester) >##### _Update2 / 07.4.18 :_ Finally I Printed Some Pla And Used The Partcooling Fan Fpr The First Time. Looks Like The Position Of It Is Perfect. Since I Was Able To Print A Really Nice Benchy And Some Badass Overhangs.

Statistics

Category

Tags