Laser Tube Mount for Aluminium Profiles
Description
Laser Tube Mount For Aluminium Profiles ----------------------------------------------------------------------------------------------------------- First Of All Thanks For The Great Holder Of Pista01! :-) I Use The Holder For A Diy Laser Cutter Project And Here Too The Tuning Works Great. Since There Is More Space Here Than In A K40 Laser Cutter, I Have Optimized The Middle Frame Base For Attachment To Aluminum Profiles. With The New Middle Section, It Is Possible To Adjust The Height If Both Brackets Are Already Attached To The Tube. So The Alignment With The Mirrors Is Even Easier And Faster. Can Be Attached With M5 & M6. For Example For Item Light --> M5 T-Nut: Https://Www.Thingiverse.Com/Thing:2771480/#Files The Right & Left Frame Base Parts Can Be Removed From The Original Design, The Holes Do Not Matter. When Installing Two Nuts And Tow Cap Nut Were Added, A Better Adjustment Or More Accurate Distance Between The Parts Is Possible. Other Parts: Https://Www.Thingiverse.Com/Thing:2259794/#Made
Statistics
Likes
69
Downloads
0