Filament guide for Printrbot Simple 2014 with wooden extruder.
Description
I Know There Are Plenty Of These Around, But They Are Often Specific To Different Generations Of Printrbot Simple. This Is For The Simple 2014 With Wooden Extruder. I Believe Printrbot, Changed From 1/4 Inch To 6Mm, At Some Stage, And So Things Just Don'T Line Up. See The Pictures With Head On View, Into The Extruder. You Can See The Feed Is Over To The Left. This Guide Feeds The Filament Directly To The Geared Wheel And Bearing, Giving It No Chance To Buckle. It Has A Chamfer On The Bearing Wheel Side To Allow It To Get As Close As Possible. This Is A Remix Of A File Called Fix.Stl. You Can See It In One Of The Pictures, It'S Brown, And Held In With A Bit Of Cable Tie.The Trouble Was With A Forward Movment In The Y-Axis, The Guide Would Often Get Pulled Out. This Guide Also Addresses That Problem As It'S Screwed Down. You Could Tape It If You Prefer.
Statistics
Likes
2
Downloads
0