Manga Screen 2 Large Enclosure
Description
Display Enclosure For The Manga Screen 2 (5.9" Large Version). Designed To Be As Slim As Possible And Provide Cut-Outs For 50 X 50 Mm Vesa Mounting Built Into The Back Of The Display Controller Mounting. Bezel And Back Should Snap Together (0.4Mm Clearance On Sides For The Display). Bezel Tabs Are Fragile And Can Easily Be Broken Off. Print Bezel File At 100% Infill Without Supports At 100 Micron Layer Height. Back Can Be Printed At 50% Infil, 200 Micron Layer Height With Supports (A Gap Of 300 Micron So Supports Can Be Easily Removed. The Vesa Arm Mount From Https://Www.Thingiverse.Com/Thing:2799628 To Attach To The Top Of The Printer Frame With 2X M3 Screws And T-Nuts. I Have Added Mounting Holes For M5 Screws And T-Nuts (File Mount_Frame_2020_Hole.Stl)
Statistics
Likes
31
Downloads
0