Lisam 210 Indestructable Kit
Description
This Is The Official Lisam 210 Indestructable Kit By Marc Ruhl. The Motor Shoes Were Remixed. Thank You, Janmittner! All Files Are .3Mf Format. Cura Will Open And Read Them Without Problems. If You Need A Special Design, Just Leave Me A Message (Comment). Everything Is Completely Printable Without Support! • "Back Cover" -Available In 5-25Mm Height -12 And 14Awg Versions Available -Meshed And Unmeshed Available -Optional Sma Output -Different Arrangements •"Runcam Micro Protection" -Meshed For Better Airflow -Good Protection For The Camera -Good Electronics Protection -Less Grass In Your Electronics -You May Need A Hot Air Gun Or A Hair Dryer To Fit The Camera -Supports Already In Place •"Shoes" -Available In Different Base Thicknesses -3 Or 5Mm Arm Thickness -Protect Your Motor From Asphalt, Stone Or Mud -Never Scratch Your Arms Again •"Esc Protection Plate" -Protect Your Escs From Prop Strikes -Made For Littlebee Spring 30A -35*18Mm Future Updates And Additions Are Planned! If You Have A Custom Request Or You Have Found An Issue, Feel Free To Comment:) Coming: -Thicker Camera Protection And Caddx Micro Protection -Easier Camera Installation On Camera Protection -36Mm "Back Cover"
Statistics
Likes
14
Downloads
0