Simchair MKIII cessna 182 engine & prop controls
Description
----------------------------------------- Important! Please Use Latest Files From Github: Https://Github.Com/Hc625Ma/Simchair_Models/Tree/Master/Components/Peripherals/Single%20Engine%20Ga%20Controls Visit Http://Hc625Ma.Org For Latest News And Manuals! ------------------------------------------- These Are Cessna 182 Style Engine And Prop Controls. Good For Flying Any Single Engine Piston Powered Plane Though. This Thing Is Very Easy To Make: Just Print Everything, Add 3 Slider Pots, Wire Them To An Rj45 Socket And Plug It Into A Col Slot Of Simchair Mkiii Controller (Or Use Your Own Controller). As This Is Unlikely To Be Used For Rc Flying, And Due To Knobs Placement In A Real 182, This Is Intended To Be Mounted On The Desk. You Will Need: 6 X M3X25Mm Screws And 2 M3 Nuts 3 X Sl-4515G Slider Potentiometers Or Similar Ones (Https://Static.Chipdip.Ru/Lib/996/Doc000996699.Pdf) Red, Blue And Black Nail Polish (Optional) 1 X 8P8C Socket 1 X Regular Ethernet Cable (If Used With Simchair Mkiii Controller) Superglue (A Drop Put Under A Potentiometer Will Fix It In Place) Simchair Mkiii Controller (Or Another Controller) ---- Update 19.05.2018 I2C Upgrade! Connect An Arduino Pro Mini As Follows: Pin10 To Pots +5V Gnd To Pots Gnd A0 To Throttle Pot A1 To Prop Pot A2 To Mixture Pot Raw To Rj45 Socket Pin 1 (Orange-White Wire On The Plug) Gnd To Socket Pin 2 (Orange-White Wire On The Plug) Scl To Socket Pin 3 (Green-White Pin On The Plug) Sda To Socket Pin 4 (Blue Wire On The Plug) Flash The Ino File To The Board And Get 3 10 Bit Axes For Your Single-Prop Ga Plane!
Statistics
Likes
42
Downloads
0