SQ12 50° and 35° Camera Mounts
Description
The Sq12 Records Surprisingly Well Video For As Small And Cheaply Priced As It Is. I Wanted To Run This On My Quad, But The Original 40 Degrees Was Too Low For Faster Flying. I Modified It By Changing The Degrees To 50 And Removed The Tunnel-Thing (Whatever It Is Called) On The Back. The Thinner Back Part Should Help To Reduce Vibrations To The Camera Itself By Being Thinner. This Easily Mounts To A Top Plate With A Ziptie Or Can Be Threaded Through With A Battery Strap. I Laid This Over On Its Side So That It Should Print Real Easy As It Is. I'Ve Been Printing It With Supports And They Are Easy To Remove Since They Are Just In The Camera And Button Openings. I Printed It With Tpu At 80% Infill And 0.2Mm Layer Thickness. It Is Snug Fit And The Camera Lens Extrudes Just Enough To Help Hold It In The Mount. Kudos To The Original Designer. I Uploaded A Second Version. It Is Identical Except That The Angle Is A Little Lesser At 35 Degrees.
Statistics
Likes
14
Downloads
0