Xenon 5-Watt Light Bracket for Anet A8
Description
I Decided To Design My Own Fixture To Hold A Lightbulb. Lightbulb Link Below: Https://Www.Amazon.Com/Dp/B001B4Ap0E/Ref=Asc_Df_B001B4Ap0E5374584/?Tag=Hyprod-20&Creative=394997&Creativeasin=B001B4Ap0E&Linkcode=Df0&Hvadid=194946745349&Hvpos=1O4&Hvnetw=G&Hvrand=17155456221707674958&Hvpone=&Hvptwo=&Hvqmt=&Hvdev=C&Hvdvcmdl=&Hvlocint=&Hvlocphy=9005645&Hvtargid=Pla-313389363006 This Has Worked Very Well For Me So Far. Never An Issue And Lightbulb Hasn'T Moved Nor Have The Wires. Post-Processing / Cleaning Up The Part Is Relatively Straight Forward. At The Very Least This Part Will Be A Good Test If Your Supports Are Working Properly. You'Ll Need Some Kind Of Way To Hook Up The Light Bulb, I Had Been Using An Atx Power Supply So I Used The 5 Volt Output And Connected A Switch (Shown In One Of The Pictures). This Design Was Done Somewhat Half-Hearted, Could Definitely Be Improved And Developed Into A More Robust Design. Cura Settings: 90 Mm/S Print Speed Printed W/ Pla (200 Nozzle, 80 Bed) 1 Mm Top/Bottom Thickness 0.8 Shell Thickness Support Settings: Structure Type = 'Lines' Overhang Angle 60 Degrees Fill Amount 25% Distance X/Y 0.5 Mm Distance Z 0.15 Mm
Statistics
Likes
4
Downloads
0