Servo driven tracked rover w/suspensions (Remixed)

Description

Unlike The Original, This Requires Only 8 Bearings 627Z Or 608 (Like Spinner), Making It More Economical But Preserving The Resistance Of The Wheels. In Addition, I Created A Support For The Raspberry Pi 3 And Another To Hold An Lm2596 Module To Reduce The Voltage Of A 4S Battery That Had Fallen Into Disuse. The Base.Stl Or Main, Is Based On The Design Of Diass07. Https://Www.Thingiverse.Com/Thing:1736808/#Comment-1202412 I Did Not Edit The Servogear, Left_Skirt, Right_Skirt And Track_175Mm Files, But I Upload The Original Lynlim Design For Ease Of The User Who Wants To Download The Project. ### 3D - Parts * X1 - Base * X1 - Back Right2 * X1 - Back Left2 * X1 - Raspberry_Support * X1 - Raspberry_Support_2 * X1 - Raspberrymount * X3 - Suspension Damper Pin1 * X3 - Suspension Damper Pin2 * X8 - Taparueda * X2 - Trackwheelback * X2 - Trackwheeltop * X4 - Trackwheelunder * X1 - Front * X2 - Servogear * X1 - Left_Skirt * X1 - Right_Skirt * X66 - Track_175Mm ### No 3D - Parts * X2 - Servo Motors Mg996 Hacked For Continuous Rotation. * X6 - Ballpen Springs (The Stiffer Type) * X8 - Bearings 627Z ( 7 X 22 X 7 Mm), If You Have 608, You Need To Fill... ### Electronic Hardware Whatever You Want, But This Design Has * X1 - Raspberry Pi 3 * X1 - Lm2596 To Reduce A 4S Battery To 5V ### Videos Https://Youtu.Be/Esgmjx5Qcia Https://Youtu.Be/D8Feyveklp8

Statistics

Category

Tags