Noozle Cleaning Brush Corner
Description
Made For 6Mm Bed Thickness (Bed + 3Mm Glass). It Allows To Hold Up To 3 Dremel Type Brass Brush. The Stl Is For Front Right Corner. In Marlin, Just Enable The Nozzle_Clean_Feature And Set The Positions According To Your Own Endstop Positions Mines Are Nozzle_Clean_Start_Point { 195, -15, (Z_Min_Pos + 15)} Nozzle_Clean_End_Point { 210, 0, (Z_Min_Pos + 15)} Then In Your Slicer, Use G12 P2 R6.5 S5 (For Example) In Your Gcode Starting Sequence Https://Youtu.Be/Pzpdnw_Ul5W
Statistics
Likes
2
Downloads
0