Vintage Barn Pulley
Description
This Is A Large Old Fashioned Barn Pulley. It'S For Decorative Purposes Such As Retro Pendant Lights Or Washing Lines That Need A Vintage Looking Pulley. The Pulley Takes Large Rope Or Cable Up To 25Mm / 1 Inch In Diameter. The Overall Size Is 215Mm High, 200Mm Wide, With A Pulley Size Of 160Mm Diameter (About 6-1/4" Round). Parts Will Comfortably Print On A 200 X 200Mm Bed - Just Rotate The Side Pieces A Little So They Print On The Diagonal. As Well As The Printed Parts, You'Ll Need Some Nuts, Bolts And Washers: - 2 X 5Mm X 50Mm Pan Head Bolts For The Side Spacers - 1 X 8Mm X 50Mm Pan Head Bolt For The Top Hangar Plus Washers And Nyloc Nuts. If You Choose To Print The Center Pulley In Two Halves As I Did, It Can Be Glued And Held Together With 5 X 3Mm X 18Mm Screws. Its The First New Thing I'Ve Posted For A Couple Of Years So Do Hope You Enjoy! Solidworks Files Are Included - Go Nuts.
Statistics
Likes
76
Downloads
0