COLLENCE MOSFET Case with 70mm fan pattern
Description
This Is A Mosfet Case That I Designed To Fit A 70Mm Fan I Had Lying Around, And [This Mosfet](Https://Goo.Gl/Y7Vxur) I Purchased From Amazon. I Am A Huge Fan Of All Metal Threads For Durability, So All Of The Fastener Connections Are Designed For Thermal Inserts. The 70Mm Fan Also Has Threaded Inserts, But They Do Not Require Heat, They Just Slip Into The Fan Mounting Holes (As Shown In The Preview Images). Here Is A Bill Of Materials For Size And Quantity Of The Hardware I Used In My Project. Hardware: 8X - [M2.5 X 0.45 - 5Mm Shcs](Https://Www.Mcmaster.Com/#91292A009/=1Btq9U5) 8X - [M2.5 X 0.45 - 3.4Mm Thermal Set Inserts](Https://Www.Mcmaster.Com/#94180A321/=1Btqa1Y) 4X - [M2.5 Flat Washer](Https://Www.Mcmaster.Com/#93475A196/=1Btqb2Y) 4X - [M3 X 0.5 - 14Mm Shcs](Https://Www.Mcmaster.Com/#91290A119/=1Btqc90) 4X - [M3 Flat Washer](Https://Www.Mcmaster.Com/#98269A420/=1Btqcqy) 4X - [M3 X 0.5 Thread Insert](Https://Www.Mcmaster.Com/#94510A240/=1Btqd9C) All M3 Hardware Is Used To Mount The Fan, All M2.5 Hardware Is Used To Mount The Mosfet And Fasten Case Halves Together. See Images For Details. Also, The The Half Circle Lugs On Either End Of The Case Bottom Are Used To Zip-Tie The Wires For Strain Relief. This Way, The Wires Won'T Fatigue And Break At The Terminals. If There Is Any Interest, I Can Upload Either Step Or Parasolid Files If Anyone Wants To Modify These Parts To Exclude The Thermal Inserts.
Statistics
Likes
13
Downloads
0