Strap Buckle (No Supports)

Description

**There Are Two Models, One With Teeth And One Without. I Recommend The Model With Teeth. This Will Prevent Slippage Of The Straps. ** ** Update 28Sep2018: I Uploaded A Strap Keeper To Hold The Straps Together.** Although It Looks Very Similar To The Original Model, This Is A Complete Redesign. I Made Some Changes That Suited Me Better. It Has Less Play And Self-Centers When Clicking The Parts Together. I Also Made The Button Smaller, Although It'S Just As Easy To Use. The Buckle Is Self-Tightening. The Harder You Pull It Apart, The More Engaged The Locking Mechanism Becomes. Under Load, It Will Not Slip Apart Unless It Catastrophically Fails.The Engagement Has A Very Satisfying *Click* When You Connect The Two Parts Together. You Could Also Use This As A Belt Buckle. I Have Uploaded Two Models For Each Part. The Only Difference Is The Strap Hole Sizes. Most People Will Probably Use The Large Size. I Printed These At 80% Scale Which Produce A Strap Hole Width Of 21Mm. Native Size Produces A Strap Hole Width Of 27Mm. Please Post Your Makes And Comments! **Check Out My Other Designs Https://Www.Thingiverse.Com/Mistertech/Designs**

Statistics

Category

Tags