Motorcycle Chain lube system
Description
I Made A Chain Lube System For My Bike. This Works Bij Pressing A Primer Bulb That Is Connected To A Reservoir Of Gear Oil. Bill Of Materials; -Ep W90 Gear Oil -Https://Www.Ebay.Com/Itm/New-Motorcycle-Rear-Brake-Master-Cylinder-Tank-Oil-Cup-Fluid-Bottle-Reservoir-Ap/172464956888?Sspagename=Strk%3Amebidx%3Ait&_Trksid=P2057872.M2749.L2649 ( Brake Reservoir) -Epoxy Grade Glue(Any 2 Component Will Work). -Https://Www.Ebay.Com/Itm/Fish-Tank-Aquarium-Control-Valve-Airpump-Splitter-Air-Flow-Tube-4Mm-Pipe-Nozzle/332264477662?Sspagename=Strk%3Amebidx%3Ait&Var=541275182073&_Trksid=P2057872.M2749.L2649 (There Are Cheaper Ones) -Https://Www.Ebay.Com/Itm/1-5-10Pcs-Petrol-Snap-Fuel-Bulb-Pump-In-Primer-For-Stihl-Ryobi-Walbro-Husqvarna/192063764781?Epid=505373856&Hash=Item2Cb7E4792D:M:Mminksuzysv1C1Hynyrfpnw (Petrol Primer Bulb) -Hose With Inner Diameter Of 4 Mm. Installation Pdf Is Included Above, Please Leave Feedback On The Retarded Things I Put Into It :). Note; I Printed These Parts In Petg, And They Still Work After 500 Miles. Don'T Print The Nozzle And Main Body For The Pump With Support In The Inner Channels. You Won'T Get The Support Out. It Will Print Out Fine Without Support On The Inner Channels. (The Hose Connection Should Have Support Obiously) Also The Nozzle For The Rear Sprocket Is Made For A 520 Chain. It Might Or Might Not Fit A Different Chain/Sprocket. I Did Add Another Nozzle, Might Be Usefull Depending On The Bike You Are Riding. Happy Diy :)
Statistics
Likes
87
Downloads
0