Hantu 5" 210mm Antenna & Camera Mounts (Mode 2 Ghost Clone)

Description

This Is An Antenna Mount And Micro Camera Mounts For The Hantu 5" 210Mm Quadcopter Frame. The Mounts Included With The Frame Are Junk. The Antenna Mount Snaps Very Easily And The Camera Mounts Slide Too Easily Around The Spacers. Print These Out Of Tpu And They Should Hold Up Just Fine In Crashes. The Camera Mounts Should Work Whether Or Not You'Re Using The Lock Nuts Below The Spacers Or Not. They Hold The Camera Back Far Enough That It Should Not Touch The Lock Nuts Below It. The Hantu Frame Is A Clone Of The Mode 2 Ghost Frame. However, They Are Not The Same Size, Thus, 3D Printed Pieces For One Will Most Likely Not Fit The Other. The Space In The Top Plate Above The Camera Is Pretty Narrow. The Large Lens Of The Runcam Eagle Micro Won'T Fit Through It. The Eagle Micro Will Have To Have A Low Tilt Angle. The Hantu Frame Is Available Here: Https://Www.Banggood.Com/Hantu-5-Inch-210Mm-Carbon-Fiber-Frame-Kit-4Mm-Arm-With-3D-Printed-Parts-For-Rc-Fpv-Racing-Drone-P-1262946.Html?P=6Z050013977120130325 The Frame Review Video Can Be Found Here: Https://Www.Youtube.Com/Watch?V=C9Hy4Fdajvu The More You Know... "Hantu" In Malaysia Means "Ghost". Hantu Top Plate Shark Fin: Https://Www.Thingiverse.Com/Thing:2979615

Statistics

Category

Tags