SchizoWhoopie - KingKong TIny6 / Tinywhoop replacement frame (ABS/TPU/Nylon)

Description

**Update 2018-03-16** So Obviously The Pla Version Of This Breaks After A Couple Of Crashes. I'Ve Been Tinkering And Attempted To Make This Out Of Tpu (Because Why The Hell Not) And Added A Little Lip To The Ducts. It'S Nearly Indestructible Now! I Also Added A Tiny X-Brace To Give Stiffness To The Tpu Version And A Little Camera Clamp That Holds It Into Place And Shaved More Weight In More Places, So This Now Weights About 0.25 Grams Less Than The Original Version Even With The Added Cross-Brace And Camera Brace. ** V2 Features** - Designed To Be Printed In Abs/Tpu/Nylon (Frame Only) - Adds Lip To The Ducts For ~15% More Thrust - Adds A Brace So The Camera Doesn'T Fall Out. Force It Into The Holes Besides The Camera - Adds An X-Bar To Keep The Motors From Flexing - Reduced The Size Of The Battery Chute And Made It A Bit Tighter, Seems To Work Just As Well - Tightened The Motor Mount Holes By 0.1Mm To Make It Grip Your Motors A Bit More **Instructions** - Print The Frame In Abs/Tpu/Nylon - Print The X-Bars, Camera Mount And Battery Chute In Pla Or Abs - X-Bar Not Need When Printed In Abs Or Nylon ------------ My Very First Original Kingkong Tiny6 Replacement Frame. **Features:** - No Canope Needed, Lowrider. - Compartment That Holds The Receiver Behind The Camera - Top Or Bottom Mounted Battery Customized Battery Chute *If You Have A Better Way To Mount The Battery Yourself You Don'T Need The Battery Chute.* **For Top Mounted Battery Chute:** Melt Or Glue It Onto The Pins After Mounting It On Top Of The Fc. **For Bottom Mounted Battery Chute** - When Assembling, First Feed The Camera And The Rx Through The Center Ring - Add The Battery Chute And Lock It Over The Pins. (Angled Side Towards The Front) - Add The Flight Controller Upside Down (Connectors Facing Up) On Top Of That, It Clamps Down Automagically Using The Softmounts - Connect Motor Wires (Left One Right, Right One Left) And Set 180Degrees Board Rotation In Bettaflight I Printed And Weighed It In Pla And That Works. Abs Or Nylon Is Probably Stronger And Somewhat Lighter. Created With Tinkercad, Check Out My Latest Version Here: Https://Www.Tinkercad.Com/Things/0Rncyyidh0D

Statistics

Category

Tags