Da Vinci 1.0 Pro cable chain mounts
Description
Have Used The Chassis Mount From This Remix Source File And It Remains The Same. Added A Mounting Plate For The Head Of The Machine, It Printed An Fitted Fine First Time ******To Secure The Plate To The Head There Is A Small Modifaction Required To The Screw That Retains The Nozzle Clip Head*******, It Either Needs A 3Mm Nut Glued To It In The Screws Original Location To Allow It To Be Secured By A Screw From The Front Side... Or A Longer 3Mm Screw Inserted In The Original Location To Allow This Plate To Be Bolted From The Front Side, I Am Using The First Method As Can Be Seen. Have Left The Mount Plate Void Of Any Holes Apart From The One That Secures The Plate To The Head, Do Recommend A Countersunk Screw (I Just Did Not Have Any At The Time) So Items Can Be Fitted Where Desired. Then Simply Drilled 2Mm Holes Where The Chain Was To Be Mounted, Used Tapping Screws To Fix Cable Chain To The Plate And Finished The Loose End With A Cable Clip. Overall Very Pleased With How It Looks And Works, I Used A 10X10Mm Chain Here But The Connector Was Tricky To Fit Through And Care Needed To Be Taken To Prevent Damage To Harness.
Statistics
Likes
16
Downloads
0