Monoprice Mini Spool Holder
Description
Sometimes I Have To Use Reels That Have Very Small Holes. I Took Inspiration From Several Designs To Create A Holder That Could Fit A Reel With An Opening Of 30Mm But Still Strong. Uses Typical 608 Fidget Spinner Bearings. Can Be Printed On The Mini Printer With Supports. I Used Simplify3D To Print The Bottom At About 50% Fill Then Reduced To 30%. I Put A Drop Of Hot Glue On The Pegs To Make Sure I Don'T Lose Any Bearings.
Statistics
Likes
89
Downloads
0