xyz pro bed plate and spring tensioners
Description
Screw Plates Have Profiled Edges For Easier Adjustment To Make Them Fit Perfectly And Have A Bushing For The Knob. Holes Are Tight For Screw Fitting, I Drilled To 3Mm For Minimal Play And Accuracy. Some Light Sanding May Be Required If Nessarry, They Need To Fit Well And The Bed Bolts Need To Be Straight. You Will Require 2 Large For Rear And 1 Small For The Front. The Spring Plates Are Round Offering Good Support. Included Are Models For A 1Mm/2Mm/3Mm Bushing Under The Spring. More Can Be Used To Retain Extra Supporting Springs In Other Pins Located On The Black Support Arm. Avoid Pla, A Differnt Verson I Had Installed Distorted After Printing Materials At Higher Tempratures!
Statistics
Likes
2
Downloads
0