MP Select Mini V2 E3DV6 hotend mount with aux blower
Description
Update: To Use This Mod With The Original Hotend That Came With V1 And Early V2 Mini'S Use This Adapter: Https://Www.Thingiverse.Com/Thing:1835673 My Attempt At A More Compact Hotend Mount That Incorporates The Stock 30Mm Fan For The Heat Break But Adds A Blower To Cool Prints(15X50 Type) In A Broad Form Cooling Approach. This Is For The E3D V6 Hotend. The V5 That Comes On The Mini V2 Is Longer And Will Not Get The Full Air Flow On The Print. However, It Still May Work, But I Haven'T Tried It. I Have The Blower Wired To A Switched 12V And The Stock Fan Connected To The Controller. I Have Thought About Reversing That, So That The Fan Can Be Dynamic, But Haven'T Had The Need For That Yet. You Will Need Longer Fan Screws. 20Mm+. Also, I Do Not Have A Stock Gantry And Am Guessing That The Fan Will Clear The End Cap Of The X-Axis Rods On A Stock Mini. I Cannot Verify That It Will, But It Should. The Part Can Be Printed Face Down Without Supports. Also Check Out: Https://Www.Thingiverse.Com/Thing:3331244 - Remix Of This Https://Www.Thingiverse.Com/Thing:3419029 - Awesome Design That Brings The Cooling Fan To The The Front And Eliminates The Possibility Of The Squirrel Cage Hitting The Y End-Cap.
Statistics
Likes
93
Downloads
0