Simple Kossel Printing Bed Seat and Clamp
Description
A Simple Yet Effective Bed Clamp And Seat For The Kossel Plus Heated Do=240Mm Aluminium Build Plate. The Plate'S Seat Is Compatible With Standard 20Mmx20Mm Al Beams And Is Suppose To Provide A Defined Three Point Seat Of The Print Bed Additionally Minimizing The Contact Area With The Beams. The Clamp'S Front Surface Is Curved Along Two Planes: The Diameter Of The Outer Edge Gets Larger In Screwing Direction And From Bottom To Top. In This Way It Provides Some Force During Initial Tightening Which Is Increased By The Thermal Expansion Of The Plate While Heating. Still The Clamping Force Should'T Be High Enough To Cause The Bed To Buckle.
Statistics
Likes
0
Downloads
0