SCALEPRINT LINKA COMPATIBLE DOUBLE SIDED BRICK TILE MOULD 00/HO
Description
Today Have Something Special For You Linka Users A Printed Mould For Making Double Sided Brick Tiles For Those Walls You Want To See From Both Sides. The Mould Has A 2 Degree Draft Angle To Help Get The Plaster Part Out Of The Mould. I Make The Plaster Like A Paste Then Fill Both Halves Of The Mould And Then Clamp Them Together, Giving A A Number Of Taps On The Bench So All The Plaster Flows Together. If You Have A Mould Release It Will Help Get The Plaster Part Out Of The Mould. When Cured Using A Knife Separate The 2 Halves, And Carefully Working Along The Open End Lift And Remove The Part From The Second Half. This Should Also Print On An Fdm Printer With A 0.2 Nozzle As The Mortar Lines Are 0.4 Mm Wide
Statistics
Likes
55
Downloads
0