Flir Exx Exxbx Tripod Mount
Description
This Is A Tripod Mount For The Flir Exx(Bx) Camera Series. There Have Been Complaints That The Original Tripod Adapter Accessory Was Both Very Expensive ($50) And Yet Not Very Stable. Therefore Created A Cheap And Stable Version That Anyone Can 3D Print, That Fit Multiple Tripods, Including The Very Common Manfrotto 200Pl-14 Mount Plate. The Adapter Has A Thumbscrew Wheel To Secure It To The Thermal Imager, As Well As A Velcro-Strap To Further Stabilize It To The Handle Of The Imager. It Uses 2Pcs 3/8 -> 1/4 Unc Adapters To Be Able To Provide A Metal Thread For The Tripods Screw. The Thumbwheel Has To Be Threaded With A M5 Thread. [Required Hardware] 1 Pcs M5X14 Hex Socket Screw (Insex) 2 Pcs <A Href="Https://Www.Banggood.Com/Female-14-To-Male-38-Convert-Screw-Adapter-For-Tripod-Monopod-Ballhead-Dslr-Slr-Camera-P-1202193.Html?P=Dz1112667138201407Xf" Rel="Nofollow">3/8 -> 1/4 Unc Adapter</A> 1 Pcs <A Href="Https://Www.Banggood.Com/10Pcs-26Cm-Eachine-Lipo-Battery-Tie-Down-Strap-P-1137622.Html?P=Dz1112667138201407Xf" Rel="Nofollow">Velcro-Strap (20 Mm Wide, ~155Mm Loops, ~80Mm Hooks)</A> Optionally, Can Place 1Mm Soft One-Sided Foam Tape At The Top Surface And Handle Surface To Further Minimize Risk Of Wear. [Donations] If You Find That The Item Improve Your Daily Life, Consider Supporting The Designer By Sending A Tip. <A Href="Http://Www.Thingiverse.Com/Pawpawpaw85/About" Rel="Nofollow"> Click "Tip Designer" Here.</A>
Statistics
Likes
7
Downloads
0