D-Line trunking fittings

Description

<P>I Needed A Few Custom Corners To Suit A D-Line Trunking Installation I'M Planning So Decided To Make My Own. I'Ve Added All The Ones I'Ve Designed To Suit The Specific Configurations I Needed; They Are:<P> <Ul> <Li><P>Corner-22Q+22Q.Stl<Br> A Standard Corner Between 22 Mm Quadrant Trunking Which Forms The Basis Of The Next Version.</P></Li> <Li><P>Corner-22Q+22Q+15D.Stl<Br> As Above But With Ann Outlet From The Corner For 15 X 8 Mm Half-Round Trunking. I Will Use This To Take A Small Spur Off The Main Trunking (22 Mm Quadrant Running In A Corner); As The Spur Is On An Open Wall The Half-Round Shaped Is Preferred And 15 X 8 Mm Is Big Enough.</Li></P> <Li><P>Corner-22Q+30D.Stl<Br> A Corner For 22 Mm Quadrant Trunking On One Side And 30 X 15 Mm Half-Round Trunking On The Other; Mirror The Part If You Want The Opposite Hand. This Will Be Used To Convert From 22 Mm Quadrant Running In A Corner To 30 X 15 Mm Half-Round Trunking Running On Top Of The Skirting Board.</Li></P> <Li><P>Joiner-30D.Stl<Br> A Standard Joiner For 30 X 15 Mm Half-Round Trunking, Created As I Was Short Of 1 And Had Already Incorporated The Shape In An Earlier Item</Li></P> </Ul> <P>I Have These As Openscad Files And May Share Them If Interest Is Suffiicient. I Could Also Be Convinced To Produce Different Designs If Required.</P>

Statistics

Category

Tags