OpenRC F1 Motor Mount for 2212 Motors
Description
This Is The Right Axle Holder For The Openrc F1 Car. I'Ve Modified The Model To Have Mounting Holes For A 2212 Outrunner Motor. These Motors Are Cheaper Than The One Specified, And In My Experience, They Work Very Well. You Have To Use A Smaller Pinion! I'Ve Included The Set Of Pinions By Tahustvedit; Use The Smallest One. The Motor I'M Using Is A Racerstar 2212 2450Kv Brushless Outrunner From Banggood. I'M Sure That Most 2212 Motors Will Be Compatible, So Long As They Come With The Mounting Plate. If You Use A Motor With A Lower Kv, A 3S Lipo May Be Needed. Either Way, It Is Still Very Fast.
Statistics
Likes
15
Downloads
0