Magnetic Cable Holder
Description
This Is A Cable Holder With 2 Magnets Inside. The Diameter Of The Magnets Is 8Mm With A Hight Of 1Mm. You Have To Put One Magnet Inside The Mount And Glue It From The Back To A Surface. Then From The Front You Can See No Magnet - Only Through The 0.2Mm Thin Pla Cover Layer. The Other Two Pieces You Have To Put Around A 4Mm Cable. Use A Little Bit Of Glue Between The "Ziczac" Area To Fix It Permanently. Oh, And Don´T Forget To Glue On The Second Magnet ;) Have Fun :)
Statistics
Likes
43
Downloads
0