CTC Bizer Logitech C270 Webcam Mounting Bracket
Description
Remixed From Several Sources... C270 Inner And Outer Plates Originally By Luc_E - Used These As Is... They Were A Perfect Fit Straight Off The Build Plate, Used The Original Screws To Fix The Inner Plate To The Main Webcam Body... Opted To Use 2 X M3X12 Countersunk Bolts To Fix The Outer Plate To Inner As These Were What I Had Available. The Focus Ring Didn'T Work For Some Reason The Print Was To Big On The Inside And Didn'T Come Anywhere Near To Touching The Lense... Plus I Didn'T Like The Fact It Wouldn'T Lock Into The Teeth Of Lense Even If It Had Fitted Correctly So Looked For An Alternative! Focus Ring Originally By Elfco - Decided To Combine The Inner Of This With The Outer Of Luc_E One... Turned Out Better Than Expected To Make A Good Fit To The Locking Teeth Of The Lense And The Focus Ring... Allows Complete Adjustment Of The Focal Range Without The Ring Or Lense Slipping Or Becoming Unlocked From Each Other. C270 Mounting Bracket Originally By Rleblanc And Willie42 - Basically Remixed The Top Of Willie42'S Bracket To The Rest Of Rleblanc'S Bracket And To Finish This Off I Used The C270 Hinge Mount From Luc-E And Resized It To Fit And Adjusted The Holes For A M3X30 Cap Head Bolt And Locking Nut. Bracket Is A Very Good Fit To The Front Upper Frame Of The Printer And Doesn'T Move Once Clipped Into Place... Even If It Isn'T Placed Over A Frame Fixing Bolt As In The Picture(S)
Statistics
Likes
16
Downloads
0