Panasonic-Leica 100-400mm Tripod Foot
Description
A Lightweight Compact Arca-Swiss Compatible Tripod Foot For The Panasonic-Leica 100-400Mm Zoom For The Lumix Micro-Four-Thirds Mirror-Less System. It Attaches With A Ring Bolt Like [This One](Http://A.Co/9Ffxdbx), Which Also Allows The Use Of A Speed-Sling Like [This](Http://A.Co/Hasgzlf). The Design Includes Anti-Slide Features To Prevent Sliding Out Of An Improperly Tightened Tripod Head. Although I Have Used This Several Times Without Issue, I Cannot Be Responsible For Any Damage Due To The Failure Of This Print. Update: I Had The Back Split (Bottom Of Print), I Believe Due To The Torque Of The Bolt And The Fact I Only Used 3 Or 4 Bottom Layers - A Bad Idea In Hindsight. I Have Reprinted It With 10 Bottom And Top Layers And 5 Walls At 0.2Mm Layers So Should Give 2Mm Thickness For The Entire Shell. And Increased The Infill To 50%. Also, To Make The Bolt Fit More Forgiving I Added A 0.6Mm Thick Tpu Washer. Print This With Only 1 Top/Bottom Layer And 1 Wall, 90% Infill To Give It More Squish.
Statistics
Likes
6
Downloads
0