CR-10 Y Motor Stiffening Bracket
Description
<B>Requires :</B> 1X M4 10Mm Bolt And T Nut 4X M3 40Mm Bolt - Without Dampener <B>Installation:</B> 1) Loosen Y Belt 2) Loosen Motor Bolts On Frame 3) Remove Bolts At The Back Of Motor 4) Attach Bracket To Frame With M4 And T Nut, Do Not Tighten Yet 5) Attach Bracket To Motor Using The 4 M3 Bolts, Check Alignment While Tightening 6) Tighten Motor Bolts To Frame, Check Alignment 7) Tighten Bracket Bolt To Frame 8) Tighten Y Belt
Statistics
Likes
147
Downloads
0