Mini Drak Camera Mount for Session (or Runcam3) and 1177 Cameras

Description

***Update 10-5-2018*** Added Eagle2 Model With 18Mm Lens Opening For Larger Lenses ***Update 10-3-2018*** Added File Velcro 1Piece Version For Runcam Eagle2 And Runcam 3 ***Update 11-17-2018*** Added 1 Piece For Rc3 And Eagle2 Pro ***Update 12-12-2018*** Added Eagle2 Pro Version For Cameras Whose Lens Protrudes Only 7Mm From The Camera Body (The 11-17-2018 Version Assumes A 10Mm Protrusion) ***Update 12-16-2018*** Added Runcam3 Dummy And Runcam3 Dummy Weighted Models For Those That Don'T Want To Fly With Their Rc3 Or Session. The Weighted Version Provides A 1" Deep Recess Which Accepts Dubro 7 Gram Lead Weights (16X11X3 Mm) That You Can Stack To Match The Weight Of The Real Camera (About 73 Grams). Printed Solid, The Runcam3 Dummy Weighs About 56 Grams. So If You Want The Weighted Version To Match And You Print At 50% Infill Figure You Will Need 4 Weights To Match (About). The Contoured Versions Are The Same, Except They Match The Contours Of The Minidrak Nose Mounts Note: I Have Placed The Velcro 1 Piece Version As The First Photo As It Has Been Popular And To Place The Design Out Front So More Will See It. This Is The Last File In The List On The Files Tab. It'S One Piece And Installation Just Requires The Cut As Described Below To The Foam, And Gluing It In Place. The Downside Is You Will Have To Remove The Mount To Get At The 1177 Camera If It Needs Replacing, Which Will Involved Separating The Glued Connection. Or You Could Carve Out A Large Enough Hole To Push It Out The Back Into The Center Bay Of The Mini Drak. End Note. Original Summary: This Is Another Version Of Camera Mount Design I'Ve Come Up With For The Mini Drak. It Is Meant For A Gopro Session Camera Or Runcam3. The Other Side Is Designed For An Hs1177 Camera. Installation Is Similar To My Other Mini Drak Camera Mount, Except No Tunnels Are Required To Be Made Into The Center Bay. Just Need To Cut Off The Nose Per The Other Camera Mount Instructions And Create A Small Hole For The Hs1177 Camera Cable. The Foam Cut Is 17Mm Forward Of The Leading Edge Of The Center Bay Cover Indentation. Or 7Mm Forward Of The Leading End Of The Top Fiberglass Spar Grooves. Be Sure To Cut Perpendicular To The Seam In The Side Of The Fuse Top To Bottom. And Keep It Square When Looking From The Top Or Your Cameras Will Be Looking Left Or Right. The Mount Uses 4X 2.5Mm Screws X 12Mm Long And Nuts. And One 2Mm Screw 16Mm Long And Nut. I Use Nylon To Keep The Weight Down But Steel Is Fine. *** Update 03-25-2018*** Added 18Mm Dia Lens File For Larger Lens Opening. Original File Has 17.5Mm Opening ***Update 03-28-2018*** Added File Minidraknose_Session_Base Which Is 1Mm Shallower In Depth To Account For The Session Cam'S Smaller Depth Dimension ***Update 07-25-2018*** Added File Minidraknose_Runcam3_1Pc_Velcro For A One Piece Mount For The Runcam3 Held With Velcro, And 1177 Camera. Special Thanks For Marc "Appelm" Of Fpvlab For The Idea.

Statistics

Category

Tags