Ball diff
Description
Ball Diff For Tahustvedt'S Monster Truck Https://Www.Thingiverse.Com/Thing:2299884 Adjustable With Out Disassembling The Diff, Just Need To Remove The Wheel Hub And Axle And Tighten The Bolt With A Long 3Mm Hex Key. Still In Testing (Needs Adjusting After The First Drive) Uses 1X M3X25-26Mm Bolt 1X M3 Nut 1X Thrust Bearing 4X8X3.5 Https://Www.Banggood.Com/Xlpower-520-Rc-Helicopter-Parts-Tail-Thrust-Bearing-Set-P-1229065.Html?Rmmds=Mywishlist&Cur_Warehouse=Cn 1X Bearing 3X7X3 (Same As The Diff Uses) 8X Metal Bb'S 4.5Mm/177 Cal 2X Washers 7.5Mm X22Mm X1.45Mm (Anything Will Do Long As Its Close) 15/03/18 Destroyed 2 Axles On The First Test, They Where A Little Undersized And Accidentally Printed Them 1 Shell With 10% Infill. New Axles, 0.3 Bigger 5/23/18 Added Ball And Stub Axle 6/5/18 New Everything Improved Clearances On Axles And Bearings. Sunken Nut Instead Of Just Screwing The Ball Diff Center Bolt Into The Plastic. A Bit Thicker Under The Thrust Bearing To Stop It Sagging. Now Needs A Longer M3X25-26Mm Bolt And Nut. I Left The Hole 2.8Mm So It Locks The Bolt. 6/10/18 New Cv Balls And Stub Axles, Tighter Turning And Fixed The Off Center Holes.
Statistics
Likes
37
Downloads
0