CR-10s Build Plate Center Adjuster
Description
**************************************Update: 7/7/2018 ******************************************* I Have Abandoned This Thing. Reason: I Came Up With A Better Way To Address The Problem. Answer: In Short; I Put My Glass On The Build Plate. Carefully Taped Around The Edge With Masking Tape. Heated On The Build Plate. Then Poured Clear Epoxy On Top Of It. After It Cured I Put A Thin Piece Of Pei From Gizmo Dorks On Top Of That.Works Perfect Now. If This Technique Works For You Please Let People Know Where The Idea Came From. Happy Printing!! ************************************************************************************************************** Update: 3/24/18: I Decided To Change Things Entirely And I Am Abandoning This Version But Will Leave It Here For Some Time. The New Version Is Cr-10S Build Plate Center Adjuster Types. Https://Www.Thingiverse.Com/Thing:2838567 It Works Better. Update: 3/17/18: Removed V3 Parts And Uploaded A Couple V4 Parts To Fit Underneath The Build Plate On The Y-Axis. They Printed In About 1.5 Hours, But I Have Not Installed Them Yet. Update: I'M Redesigning This To Fit On The Y-Axis Instead Of The X. It'S A Pain To Adjust Right Meow. Hope To Have A New Version By 3/17/18. An Adjustable Wedge Assembly To Address My Cr10S Build Plate That Is Low In The Center. Rather Than Shim My Build Plate With Tape Or Other Methods Which I Think Make The Heated Aluminum Bed Warp Even More Over Time, I'M Trying To Make Adjustable Support For The Center Area Of The Bed. This Is Version 3 Which Is Offset From The Center Of The Bed But Has Worked Well For Me So Far. I Installed It Only Moments Ago And If It Solves My Problem I Wont Update It Here Unless Requested. Comments Welcome And If You Have A Cr10 I Hope It Adds Quality To Your Printer.
Statistics
Likes
3
Downloads
0